RAe 2/4 1001

Designed and built as lightweight prototypes CLe 2/4 201 and 202, these vehicles were intended to be used as trams and express trains in off-peak hours as well as company cruises. Compared to previous vehicles, the maximum speed was set for the first time to 125 km / h. Till then the maximum speed to operate trains was 100 km / h at the SBB. Since only the single ride was required in the specification book, during construction the installation of normal pulling and pushing devices was not considered as well as, the installation of an automatic brake. The railcars were equipped with a direct-acting brake, which was controlled together with the electric brake. The railcar 202 was Prototype for the BBC hollow shaft drive, which was later used in many traction vehicles.

Various solutions were examined to optimize luggage transportation. For example, a single-axle ski trailer has been used for several years. In order to give the railcar the possibility to pull trailer vehicles, they were equipped from 1944 till 1949 with a pulling and pushing device, to which the vehicle construction had to be strengthened accordingly. Further, the automatic brake "Westinghouse" was installed as well as a line for the train heating in trailer vehicles. In 1952, the chassis of the railcar 601 was extended by 2.60 m and various facilities were renewed.

The vehicle numbers changed several times, from 201 to 601 and later to 1001. To preserve the railcar, it is now used by SBB Historic with a top speed of 100 km / h.

Field of application and depot affiliation of the railcar 1001:

  • 1935-1939 Bern, use for trams, express trains, demonstration and company trips
  • 1939-1945 No use in regular traffic
  • 1945-1964 Lausanne, tram train in district I (Kreis I)
  • 1964 Lausanne, reserve vehicle for EXPO 1964
  • 1964-1968 Basel, on demand for extra connection trains
  • 1968 Bern, representative vehicle for special occasions
  • 1968 Historic vehicle, depot Bern
  • 1996-1997 Winterthur, temporarily stationed
  • 2004 Olten
  • Supervision by Team Olten

Build in 1935 by SLM / BBC / MFO / SAAS

locomotive data:

Length over buffer: 25.20 m

Service weight: 41 t

Friction weight: 21.20 t

Drive wheel diameter: 900 mm

Power: 400 kW / 540 hp

Speed: 125 km / h (100 km / h)

Drive:

Drive type Electric: 2 traction motors

Control hopper

Braking systems:

Automatic brake: Westinghouse (Speed dependent brake)

Shunting brake: Westinghouse

Electric brake: none

Centrifugal brake: none

Handbrake: spindle